{% if S3D.View == '3d' %} {% if S3D.API.Response.Designer %} {% endif %} {% endif %} {% if S3D.View == 'outline' %}
{{S3D.API.Response.Canvas.Rail}} {{S3D.API.Response.Canvas.OutlineDimensions}} {{S3D.API.Response.Canvas.Stringer}}
{% endif %} {% if S3D.View == 'setup' %}
{{S3D.API.Response.Canvas.OutlineSetupGraphics}} {{S3D.API.Response.Canvas.OutlineBottom}}
{% endif %}

TPH Single

The Tri Plane Hull Single is a fun, user-friendly midlength that incorporates a fresh take on a Al Merrick’s Tri Plane Hull bottom design he refined and built during the ’70s and ’80s—a Greenough inspired planning hull that generates tremendous “lift,” which provides added speed, freedom, and ease of control.

Working with surfer Devon Howard once again (see CI Mid), we set out to build a better egg-style, single-fin midlength—a genre of surfboard that can often look cool and groovy but tend to ride slow and sticky, sometimes lacking pizazz or drive through the turns. By incorporating a Tri Plane Hull bottom with a Al’s classic egg outline, and combined with our modern style rail and rocker profiles, we landed on a rather spicy midlength design that has a surprising amount of trim speed and drive through its turn in small surf—making this a reliable long-railed performer in conditions ranging from subpar to above average.

The Tri Plane Hull Single comes with beautiful color lamination options that are sealed with a matte finish gloss coat and outfitted with a minimalistic logo treatment which pays homage to some of Al’s early surfboard creations. 

To compliment this beauty of a midlength, Devon worked on a custom built, sleek single-fin that is available in three sizes: 8”, 8.5” and 9”. The CI Single Fin template is rather upright, which helps the board pivot and turn on dime—while its slender outline and conservative rake profile provide a nice flow on down the line point breaks. Our general sizing guideline goes as follows: 8” for 6’7” & under; 8.5” for 6’8” to 7’5”; 9” 7’6 & over. The CI Single-Fin can be found at your local surf shop or here. 

Wave

Size

Break

Power

Performance

Approach

Skill Level

Foot Orientation

Shape

Foil / Rails

Nose Shape

Tail Width

Entry Rocker

Exit Rocker

Rocker Style

[ BASED ON RECOMMENDED SETUP ]
Single Fin
Custom Build Stock Dims
{% for zone in S3D.Layout %} {% assign zoneIndex = forloop.index0 %}

{{zone.label}}

{% if zone.label == 'Shape' and S3D.API.Response.Volume %}

{{S3D.API.Response.Volume | round: 2 }}L

{% endif %} {% if zone.label == 'Surfer' %} Create Profile {% endif %}
{% assign visibleClass = 'dn' %} {% if zone.active == true %} {% assign visibleClass = '' %} {% endif %}
{% if zone.label == 'Shape' %}
{% for option in zone.options %} {% if option == 'Variation' %}{% continue %}{% endif %}
{% endfor %}
{% assign option = S3D.API.Response['Variation'] %}

{{option.Name}}

{% if option.SelectedChoice and option.SelectedChoice.Value != -1 %}

{{option.SelectedChoice.DescriptionWhenSelected}}

{% if option.Optional %} {% endif %} {% endif %}
{% if option.AllChoicesHaveImage %}
    {% for choice in option.Choices %} {% assign selected = 'b--blue' %} {% if choice.Value == option.SelectedChoice.Value %} {% assign selected = 'b--white' %} {% endif %}
  • {% endfor %}
{% else %} {% endif %}
{% else %} {% if zone.sections %} {% for section in zone.sections %}

{{section.label}}

{% if section.options %} {% for opt in section.options %} {% assign option = S3D.API.Response[opt] %} {% unless option.Choices.size == 0 %}

{{option.Name}}

{% if option.SelectedChoice and option.SelectedChoice.Value != -1 %}

{{option.SelectedChoice.DescriptionWhenSelected}}

{% if option.Optional %} {% endif %} {% endif %}
{% if option.AllChoicesHaveImage %}
    {% for choice in option.Choices %} {% assign selected = 'b--blue' %} {% if choice.Value == option.SelectedChoice.Value %} {% assign selected = 'b--white' %} {% endif %}
  • {% endfor %}
{% else %} {% endif %}
{% endunless %} {% endfor %} {% endif %} {% if section.options_lists %} {% for options_list in section.options_lists %} {% for option in S3D.API.Response[options_list] %} {% unless option.Choices.size == 0 %}

{{option.Name}}

{% if option.SelectedChoice and option.SelectedChoice.Value != -1 %}

{{option.SelectedChoice.DescriptionWhenSelected}}

{% if option.Optional %} {% endif %} {% endif %}
{% if option.AllChoicesHaveImage %}
    {% for choice in option.Choices %} {% assign selected = 'b--blue' %} {% if choice.Value == option.SelectedChoice.Value %} {% assign selected = 'b--white' %} {% endif %}
  • {% endfor %}
{% else %} {% endif %}
{% endunless %} {% endfor %} {% endfor %} {% endif %} {% endfor %} {% endif %} {% if zone.custom_options %} {% for field in zone.custom_options %}

{{field.label}}

{% if field.type == 'select' %} {% elsif field.type == 'text' %} {% elsif field.type == 'textarea' %} {% endif %}
{% endfor %} {% endif %} {% endif %}
{% endfor %}

{{S3D.API.Response.CurrencyName}} {{S3D.API.Response.BoardPrice}}

Order Save to Quiver
{% assign compared = false %} {% for item in data.items %} {% if item.handle == 'tph-single-fin-1'%} {% assign compared = true %} {% endif %} {% endfor %} {% if compared %} {% else %} {% endif %}
Warehouse Stock